I solved my problem ! For wake up my device i try : 1. Hold N key and POWER for 5-10 sec : device is power on with PROGRAMM MODE. 2 .Connect USB cable , but Windows see Bad USB devise. 3 . Long press POWER - device OFF.
4 . Disconnect battery. 5. Press and hold N key and attach USB : device is power on with PROGRAMM MODE , but Windows detect COM device ! 6 . Update with MaxiLink2. 7 .Disconnect USB cable and POWER OFF. Connect battery. 8 .POWER ON -DEVICE WORK.
I have the same problem with my ts401 after the update to 5.57 it wont power on. so I did hold down n and power button it would not turn on. I open the unit up unplugged the battery for 10 seconds still would not power on. I tried many times unplugging the battery and plugging the battery back in holding down the n button and enter button the unit powerd up. ok great. 2 days later same thing unit wont power on. so I got rid of the 5.57 went back to 5.56. works perfect now. something is wrong with the 5.57 version. I am waiting for the 5.58 version to come out hold that fixes the power on problem.
hello I installed the 5.58 version and I had same problem unit would not power on with the power button. I hooked up the usb cable unit turns on only in the update mode. I installed the 5.58 version again and now the tool is working right. power comes on working perfect.
I will have to see if it keeps working for the next week or 2.
Same problem. I updated to 5.57 used the TS401 several times......then all of a sudden nothing. It would not power up. Tried holding the [N] button & [power] button at the same time for 10 seconds. It worked & powered on. Updated again to 5.57 and is now working........maybe I’ll update to 5.58.